Painting a deck is very different from painting the other aspects of your house. You might think that all you need to do is hire a jack of all trades when it comes to painting requirements. The first solution that may come to a lot of people’s minds is to hire one person to get all the job done, such as the exterior and interior painting along with deck painting.
While that might seem practical, the outcome of all the tasks might not be acceptable. While you can always stay safe and choose the best Deck Painting In Melbourne professionals, you can always go DIY.
Here are some of the things that will help you if you acknowledge them before you get started.
Choosing the right materials and tools
Begin with the paint type. The acrylic-based paints are quick-drying and durable. It makes them a great choice for weathering the outdoors without peeling and fading. Moreover, you will require a paint roller with an extended handle as it is crucial for covering large areas quickly, while a smaller brush will handle the corners and edges more precisely. If you are just refreshing the deck, a stain or sealant might be more appropriate than paint. If you require adding caulk to the crevices, you will have to choose the one that matches the style and colour of your deck.
Check out the weather
Prior to you getting started, take a look at the forecast. Extreme temperatures and too much moisture may negatively affect dry time and penetration. Therefore, you will need to pencil in the painting session for a dry and mild day. Bear in mind that both stains and paints might take a few days to fully dry. Therefore, you should avoid times of the year with massive fluctuations in temperature and humidity.
Proper inspection
For the best possible results, removing the remaining stain or paint is key. However, this procedure can be very time-consuming. To see what options you may have, it is recommended to talk to the local hardware or paint store. There are some paints that allow you to go over the old stain without spending a lot of time stripping the wood.
Prior to you painting or staining, it is crucial; to look for loose screws and nails along with the imperfections that might be there in the wood. In case you find the loose nails or screws, remove them and insert new ones. If the screw and nail are not flush with the boards, consider removing them and inserting new ones. It can help prevent injuries.
Wrapping Up
When you are applying paint on your deck, consider using a 4-inch paint brush to assist cutting in faster along the border of the deck and in between deck boards. This especially helps in case the deck boards are rounded and/or have been previously painted.
If all these processes seem a little out of your reach, you can always seek assistance from the best Deck Painting Melbourne.
